The BIG Larry 2 is Nebo tools 2nd generation of the original BIG Larry work light, and it adds several new features and enhancements.
It comes with this nice gift box and all of the instructions are printed on the back.
The differences from the first version are that the NEBO BIG Larry 2 adds a spotlight and a steel clip at the top of the light. Another change is, due to the addition of the spotlight at the top, the power button has been moved to the front.
The BIG Larry 2 is slightly taller than the original by a few centimetres. The new sturdy steel clip on the back also has a screw or nail hole at the top for mounting the light.
The Big Larry 2 features an aircraft grade aluminium body.
Supplied with powerful secure belt and pocket clip.
It's also IPX4 water spray resistant.
Measuring just under 20cm (long), 3.2cm (wide) and weighs in at only 204g.
Mode Memory
The incredible BIG Larry 2 work light also has memory, meaning it will remember your last dim settings saved in each mode.
If you dim all the modes down to low, you can double click the button to activate the last dim setting in spot light mode, after double clicking the button, one more press of the button will take the light to the last saved dim setting in work light mode and another press of the button will take the light to the last saved dim setting.
Now you saved these dim settings, you can press the button once for high or double click for low.
Magnetic Base
On the bottom, the Big Larry 2 still has the same strong magnetic base that NEBO is known for and is included in the majority of our product lines. The battery compartment can also be found there at the base as well.
The magnetic base allows this versatile pocket LED work light to illuminate your working area.
Operation
Pressing the button once turns the spot light on in high mode which is up to 200 lumens shining at a distance of up to 75 meters for eight hours and another feature the BIG Larry 2 has that its predecessor does not is dimming capabilities, so simply hold down the button to dim the light as low as 60 lumens shining at a distance of up to 50 meters for 24 hours.
Pressing the button, a second time will activate the work light in high mode which is up to 500 lumens shining at a distance of up to 31 meters for 2.5 hours and if you dim it all the way down to its lowest setting, it is up to 150 lumens shining at a distance of up to 18 meters for 14.5 hours.
Pressing the button, a third time activates the red light in high mode which is up to 40 lumens shining at a distance of up to seven meters for 20 hours and in this mode the light can be dimmed down to 12 lumens shining at a distance of up to one meter for 32 hours.
Pressing the button, a fourth time will activate the red hazard light which is up to 40 lumens shining at a distance of up to seven meters for 40 hours and in this mode the light cannot be dimmed.