4K 2 Head Tripod Light
4K 2 Head Tripod Light
A twin-head lighting solution designed specifically for trade professionals, delivering a total of 4,000 lumens. Engineered for versatility and reliability, this tripod light is tailored to meet the demands of any job site.
IMPORTANT: Fully charge your NEBO 4,000 Lumen Rechargeable Twin Head Tripod Light before using it for the first time.
OVERVIEW
| 1 | 4,000 Lumen Tripod Light | 4 | 220v Domestic EU Adapter |
| 2 | Carry Bag | 5 | 240v Domestic UK Adapter |
| 3 | Power Transformer (4m Cable) | 6 | 110v Site UK Adapter |
LIGHT MODES
| MODES | LUMENS | HOURS |
| HIGH | 4000 | 1.5 |
| MEDIUM | 1000 | 5 |
| LOW | 500 | 10 |
| AC PLUG IN | 2000 | Continuous |
CHARGING YOUR NEBO TRIPOD LIGHT
CHARGING YOUR FLOODLIGHT AT HOME:
1. Connect the relevant Power Adapter cable to the Power Transformer (included). Plug the barrel plug into the AC Charging Port on the light. Charging will begin automatically.
2. When fully charged, the charging indicator LED will indicate 100%. (Full charge could take up to 6 hours).
OPERATING YOUR NEBO TRIPOD LIGHT
1. By pressing the ON/OFF button once, the light will power on.
2. Once light is on, by pressing again you can set the desired brightness level with the desired number of clicks. (10%, 25%, 100%)
3. Press the ON/OFF button once more to power the light off.
4. Pressing the Colour Temperature Button will switch the LED output from white (CCT4K) to warm (CCT7K) light.
SETTING UP THE TRIPOD LIGHT
1. Pull the tripod legs out, then downwards until the tripod legs lock (You will hear a click).
2. Once attached, insert the quick release bolt inside the Tripod base plate, the bolt will lock into position.
3. To release the light, pull the Quick Release and lift the light upwards.
4. Holding the tripod firmly in place, open the lower Quick Release Clamp and slide the tripod head to desired height level and close the clamp to lock the position.
5. For extra height, open the upper Quick Release Clamp and repeat the instruction above.
CLOSING DOWN THE TRIPOD LIGHT
1. Pull the Leg Release Clamp on the tripod leg outwards, and push the tripod downwards.
2. Now fold the three tripod legs back in towards the frame until the Leg Release Clamp locks.
SPECIFICATIONS
| Protection Class | III |
| Protection Degree | IPX4 |
| Operating Temperature | (-10 - 40°C) |
| AC Input | 16.8V, 2.8A |
| Illuminant | 70w |
| Lumens | 4000lm |
| Charging Time (AC) | 6 Hours (Approx) |
| Operating Time | 1.5 Hours (Approx) |
| Battery Type | Lithium Ion 14.8V, 4000mAh |
| Dimensions (L/W/H) (Closed) | 920 x 120 x 160mm |
| Weight | 6100g |
SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS
CAUTION - Read all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire which may result in serious injuries, death or property damage.
• Prior to use, make sure the right voltage is available
• Prior to each charge, make sure the light and mains supply cable are not damaged in any way. Never use the light if you find damage.
• Do not use the light in explosive environments in which flammable liquids, gases or dusts are present.
• Do not expose the fully immerse the light in water.
• LED lights are extremely bright. Do not look directly at the lamp.
• Do not attempt to dismantle or repair the light.
• Store the light inside the supplied carry bag whenever possible.
