The NEBO® Assist™ 1000XP Jump Starter empowers you to independently take control of the situation with its 3-in-1 design, providing jump starting, charging, and illumination.

---

PRODUCT FEATURES

Charge indicator

Illuminate your device's power status with NEBO's charge indicator. This smart feature provides clear, at-a-glance battery level information, ensuring you're never left in the dark. Watch as the indicator shifts from green to red, signalling when it's time to recharge.

USB-A Port

Maintain compatibility with your essential devices through NEBO's reliable USB-A port technology. This universal connection powers smartphones, tablets, headphones, and countless other everyday devices at optimised speeds. Multiple high-output ports allow simultaneous charging of several devices, eliminating power prioritisation decisions during travel or emergencies. Experience confidence knowing your portable power solution works seamlessly with the devices you already own and rely upon daily.

USB-C Power Delivery

Advanced technology enables rapid charging for a wide range of devices, from smartphones to laptops. With higher power output and intelligent power management, USB-C PD significantly reduces charging times, keeping you connected on the go. Compatible with various USB-C devices, it offers versatility for all your power needs. Experience the future of charging with NEBO's USB-C Power Delivery enabled power banks.

---

 

OVERVIEW

 

 

1 |  Jump Start Output	6 |  USB Input
2 |  Jump Start ON/OFF Button	7 |  USB-A to USB-C Charging Cable
3 |  USB Output	8 |  Floodlight ON/OFF
4 |  USB ON/OFF Button	9 | LED Floodlight
5 |  LED Indicators	10 | Jumper Cable

  

---

 

CHARGING YOUR NEBO ASSIST™ 1000XP JUMP STARTER

CHARGING AT HOME: 

1. Connect the USB-A Cable end to the USB Adapter that came with your device (not included), and plug the USB-C end into the USB-C Port, located on the front of your Assist 100XP Jump Starter.

2. Plug the USB Adapter into a standard wall outlet.

3. The USB-C Port, port will begin to charge automatically when a device is detected.

4. The Assist 1000XP will begin to charge automatically (this could take up to 3 hours). When fully charged the indicator lights will show green.

5. Disconnect cable and power off your Assist 1000XP Jump Starter.

---

 BEFORE YOU GET STARTED

1. Make sure the jump starter has at least 50% charge
2. You can not jump start while using the USB charge function
3. Ensure the vehicles headlights, radio, car alarm and air conditioning
are turned off.

JUMP STARTING YOUR VEHICLE

1. Plug the jumper cables into the jump-start output.

2. Attach the jumper-cable clamps to the vehicle battery. - Red clamp on positive terminal (+) - Black clamp on negative terminal (-)

3. Press the "Jump Start" button to begin the safety check. The green
light should flash for 3 seconds then turn solid.

4. Start your vehicle.

5. Make sure the jump start button is off. Carefully disconnect the jump
starter cable clamps from the car battery.

NEBO SPARK-PROOF TECHNOLOGY: Eliminates the potential of sparking while connecting and disconnecting jumper cables.

NOTE
Do not touch red (positive) and black (negative) clamps together. Allow 15 seconds between each jump-start attempt. If your vehicle does not start after three attempts, consult a certified mechanic

 

---

 

CHARGING YOUR ELECTRONIC DEVICES

1. Connect the appropriate cable to your device

2. Plug the cable into the appropriate USB output port.

3. Press the USB ON/OFF button to begin charging your device.

4. Disconnect cable and power off your jump starter.

 

 

NOTE
It is recommended to use charging cables provided by the
manufacturer of your devices.

---

 

USING THE FLOODLIGHT

1. Floodlight ON/OFF Button once = ON White Floodlight

2. Floodlight ON/OFF Button twice = ON Red Floodlight

3. Floodlight ON/OFF Button three times = ON Emergency Red S.O.S.

4. Floodlight ON/OFF button four times = OFF

NOTE
Do not look directly into the LED floodlight.

---

 

SPECIFICATIONS

USB-C Input	5VDC/2A
USB Output 1 and 2	5VDC/2.4A Each
Jump Start Output	12VDC/275A for 3s, 1000A Peak
Floodlight Output	100lm
Battery Energy	24420mWh
Cells	2200mAh
Battery Pack Configuration	3S1P - 11.1V Nominal
Operating Temperature	Charge: 32°F-113°F (0-45°C)
Discharge Temperature	Discharge: -4°F-122°F (-20-50°C)
Storage Temperature	-4°F-149°F (-20-65°C)
IP Rating	IP65
Dimensions	6.46 x 3.75x 1.71 in. (164.2 x 95.2 x 43.5mm)
Weight	1.08 ± 0.07 lb. (490 ± 30g)

 

 

---

 

SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS

CAUTION - Read all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire which may result in serious injuries, death or property damage.

• Read all instructions before using the product.
• When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your jump starter may cause electric shock to users and damage equipment
• Keep dry and away from moisture and corrosive materials. This product should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
• Do not expose to moisture, water, rain, or snow.
• Keep away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.
• The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid, ejected from the battery may cause irritation or burns.
• The product may become warm under extended high power operation. Do not cover, wrap, or otherwise, restrict during operation.
• Do not disassemble the the product. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
• Do not drop or subject to strong impacts. Do not operate if the unit has received a sharp blow, or has otherwise been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• This product and its accessories are not toys and should be kept away from children.
• Do not insert any foreign object into the ports or openings.
• Do not clean with harsh chemicals, soaps or detergents. Just wipe the unit with a soft cloth.
• Make sure the charging ports do not become contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local guidelines.