Assist Mini Air Compressor Manual
PRODUCT OVERVIEW
Components
- Air Hose
- Digital Display
- Pressure "+" Button
- Pre-Set Mode/Unit Button
- Air Compressor On/Off Button
- AC Accessories Storage
- USB-A to USB-C Charging Cable
- Air Compressor Output
- LED Flashlight
- USB-C Input/Output
- Presta Valve Adapter
- Tapered Nozzle
- Inflation Needle
- Flashlight On/Off Button
- Pressure "−" Button

DIGITAL DISPLAY
- Car Preset Icon: Car mode is active when this icon is displayed.
-
Motorcycle Preset Icon: Motorcycle mode is active when this icon is displayed.
-
Bicycle Preset Icon: Bicycle mode is active when this icon is displayed.
-
Sports Equipment Preset Icon: Sports and leisure equipment mode is active when this icon is displayed.
-
Flashlight Icon: The flashlight function is active when this icon is displayed.
-
Air Pressure: Displays the air pressure setting.
-
Pressure Unit: Displays the pressure in PSI, BAR or KPA.
-
Battery Level: Displays the charge of the internal battery.

CHARGE THE AIR COMPRESSOR
IMPORTANT:
Fully charge the mini air compressor before using it for the first time. When not being used, store in a cool dry place.
CHARGING THE MINI AIR COMPRESSOR:
- USB-C cable (included) with a wall adapter (not included) rated for 5V/3A.
- LED indicator lights will display the current power level.
Battery Level Indicators:
- 0% - 15%
- 44% - 16%
- 45% - 73%
- 74% - 100%
ESTIMATED CHARGING TIME:
Less than 2.0 hours via USB-C.


USING THE COMPRESSOR
1.
Remove the air hose and connect it to the air compressor output. Be sure to choose the right air nozzle for the item you want to inflate and attach it to the air hose.

2.
Long press the ON/OFF button to turn on the Mini Air Compressor. Then short press the Preset Mode/Unit button to select the desired preset mode - car, motorcycle, bicycle, sports equipment.

3.
Long press the Preset Mode/Unit button to cycle through pressure units - PSI, BAR, KPA.
NOTE: PSI is the default unit of measure.
Use the "+" and "−" pressure buttons to adjust to the desired pressure target.
4.
To inflate, press the compressor's On/Off button. When the specified pressure target is met, the compressor will automatically turn off.
NOTE: Air compressor is not compatible with large capacity objects, such as air mattresses and inflatable swimming pools.

USING THE FLASHLIGHT
Long press the ON/OFF button to turn on the Mini Air Compressor. Then press the Flashlight On/Off button to turn the flashlight on.
- Flashlight On/Off button once = Flashlight On
- Flashlight On/Off button twice = Emergency SOS
- Flashlight On/Off button twice = Strobe On
- Flashlight On/Off button twice = Flashlight off

USING THE POWER BANK
The USB-C input/output port is rated for up to 15W (5V/3A).
- Connect the appropriate cable to your device. We recommend using the USB-C charging cable provided by your device manufacturer.
- Plug the cable into the USB-C input/output port on top of the device.
- Charging will begin automatically.
- When charged, disconnect cable and power off your mini air compressor.



COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by switching the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving aerial.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
CAUTION
To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and earthed. Operation with non-certified peripherals or non-shielded cables may result in interference to radio reception.
MODIFICATION
Any changes or modifications to this device could void the warranty.