BANDO 1K STRAP LIGHT
BANDO 1K

6 LIGHT MODES
MODES | LUMENS | HOURS | METERS |
HIGH | 1000 | 5h 30m | 35 |
MEDIUM | 400 | 8h | 23m |
LOW | 180 | 28h | 10 |
RED | 18 | 22h | 4 |
RED HAZARD | - | - | - |
RED SIGNAL | - | - | - |
OPERATION
Press and release the power button to cycle through light modes.
WHITE HIGH > WHITE MEDIUM > WHITE LOW >RED LIGHT > RED HAZARD > RED SIGNAL
After 8 seconds of no button activity, the next press will turn off the light.
DIRECT-TO-RED:
Press and hold the power button from OFF.
MEMORY
Double press the power button from OFF to access the last
used mode.
POWER BANK
To charge your phone or other USB device, plug it into the
USB-C port on the handle of the work light.
CHARGING
To charge, Insert the USB-C end of the included charging cable into the USB-C port on the handle of the work light. Next, insert the USB-A end of the charging cable into a
power source with a USB-A port.
CHARGING INDICATOR
When charging, the power buttons acts as charging indicators.
POWER INDICATOR
During use, the power buttons acts as power level indicators.
ROTATING LIGHT BAND
The flexible light band can be independently rotated 120° from the handles for more control over the direction of the light source.
ADJUSTABLE STRAP INSTALLATION
The adjustable strap comes unattached from the work light.
To install, insert one end of the strap loop into the attachment point at the bottom of the light handle.
Repeat this process for the other handle
HANG IT
Connect the included hanger hooks (2) to the strap buckles. Hook a hanger to each
side of the bonnet.
Adjust the strap to desired tightness.
Note: This work light is designed to fit vehicle bonnets that are 1.3m - 1.7m wide
ATTACH IT
Strong magnets are located on the backside of both handles and can be attached to metallic surfaces for hands-free use.
WEAR IT
Connect the adjustable strap buckles together to form a
wearable work light. Place over shoulder and around torso for hands-free use.
Adjust the strap to desired tightness.