Curvbeam 850 Flex
CURVBEAM 850 FLEX

Light Modes

Operation

Press the Flood, Spot or Safety Light button repeatedly to cycle through light modes. All 3 lights can operate in tandem.
SPOTLIGHT: High > Medium > Low > Off
Flood Light: High > Low > Red > Off
Safety Light: Red > Red Flashing > Off
After 8 seconds of no button activity, pressing any button will turn the corresponding light Off.
TURBO: From On, press and hold either the Spotlight or Flood Light button to activate both lights at maximum output.
SPOTLIGHT DIRECT-TO-LOW: From Off, press and hold the Spotlight button.
Flood Light DIRECT-TO-RED: From Off, press and hold the Flood Light button.
LOCKOUT: From Off, triple press the Spotlight button to disable or enable.
Charging

Open the battery compartment & remove the battery.
Insert the included USB-C cable into the port on the battery and connect to a power source.
CHARGING STATUS: A small light near the charging port on the battery acts as a charge indicator.
🔴 Solid Red: Charging
🟢 Solid Green: Charging completely
ALKALINE BATTERIES: This light also runs off disposable alkaline batteries. To install the batteries, open the battery compartment and replace the lithium-ion battery with (3) AAA alkaline batteries. DO NOT mix old and new batteries. DO NOT mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, Ni-MH, etc.) batteries.
POWER INDICATOR: This headlamp includes 4 Red LEDs on the battery cover that indicate the battery charge. When only one LED is lit, use should be discontinued and the product recharged.
