Leo 10000 Flex Manual

OPERATION

Press power button Ⓝ to turn the unit on. Press and release repeatedly to cycle through modes:

High > Medium > Low > Off

After 8 seconds of inactivity, the next press will turn the flashlight off.

TURBO MODE: Press and hold the power button from any mode (other than lockout) to activate Turbo.

STROBE: Double-tap the power button to activate Strobe.

DIRECT-TO-LOW: Press and hold the power button from Off.

LOCKOUT: Triple press the power button from Off to toggle Lockout On and Off.

CHARGING INSTRUCTIONS

OUTPUT CHARGING PORT

Charge your phone or other USB device.
ONLY WORKS WITH SUPPLIED LITHIUM BATTERY

INPUT CHARGING PORT

To charge the flashlight connect to a power source using the included USB cable.

 

POWER INDICATOR

The outer ring of the power button is divided into 4 segments representing the current battery level.


ALKALINE BATTERIES

This flashlight also runs on disposable alkaline batteries. To install, unscrew the bottom cap and remove the lithium-ion battery. Load the included battery adapter with (6) AA alkaline batteries and insert the adapter into the flashlight. Reinstall the bottom cap.