Rambler PS100
The Rambler 100 is a hand-held, portable power station that is ready to go wherever you may roam with USB, wireless and AC charging ports. With 96.2 watt-hours of power, it packs a lot into a compact design that also meets the guidelines for a carry-on approved item so you can stay powered up at the terminal and 30,000 feet.
OVERVIEW
| 1 | USB-A Output Ports | 7 | Floodlight ON/OFF Button |
| 2 | USB ON/OFF Button | 8 | Laptop Charger Adapters |
| 3 | Digital Display | 9 | UK/EU Charging Adapter |
| 4 | USB-C Input/Output Port | 10 | USB-C to USB-C Cable |
| 5 | DC Input Port | 11 | USB-C to DC Cable |
| 6 | Floodlight | 12 | DC to Car Charger Cable |
CHARGING YOUR NEBO RAMBLER™ 100
CHARGING YOUR RAMBLER 100 AT HOME:
1. Connect the USB-C Cable to the USB-PD Charging Adapter (included). Plug the other end into the USB-C Charging Port. Charging will begin automatically.
2. When fully charged, the digital screen will indicate 100%. (Full charge could take up to 2.5 hours).
3. Disconnect cable and power off your Rambler 100.
CHARGING RAMBLER 100 IN YOUR VEHICLE:
1. Plug the 12V DC Power Cord (included) into the DC Input Port. Plug the other end into the vehicles DC output (cigarette lighter). Charging will begin automatically.
2. When fully charged, the digital screen will indicate 100%.
3. Disconnect cable and power off your Rambler 100.
CHARGING WITH A SOLAR PANEL (Sold Separately):
1. Connect the DC5525 cable that came with your solar panel to the DC Input port. Charging will begin automatically.
2. When fully charged, the digital screen will indicate 100%.
3. Disconnect cable and power off your Rambler 100
CHARGING YOUR ELECTRONIC DEVICES
1. Connect the USB cable that came with your device.
2. Plug the cable into the appropriate USB Output Port (A or C).
3. Press the USB ON/OFF button to begin charging your device.
4. When charged, disconnect cable and power off your Rambler 100.
NOTE
The NEBO Rambler 100 USB charging feature will automatically power off after 30 minutes of inactivity.
WIRELESS CHARGING
1. Place your wireless compatible device onto the wireless charging pad.
2. Press the USB ON/OFF Button to begin charging.
3. When charged, disconnect cable and power off your Rambler 100.
NOTE
Make sure the device is aligned in the centre of the wireless charging surface and that no gaps or obstructions are in between
CHARGING YOUR LAPTOP
1. Choose the correct laptop adapter and connect it to the DC end of the Cable, then connect to your laptop.
2. Plug into the USB-C port, as shown below.
3. Press the USB ON/OFF Power Button to begin charging.
4. When charged, disconnect cable and power off your Rambler 100.
NOTE
Make sure the USB-C plug is fully plugged into the USB-C port before pressing the USB Power ON/OFF Button.
*The multi-voltage power pack will charge a wide variety of laptops either via the USB-C or Laptop Adapter
USING THE FLOODLIGHT
1. Floodlight ON/OFF Button once = ON White Floodlight
2. Floodlight ON/OFF Button twice = ON Red Floodlight
3. Floodlight ON/OFF Button three times = ON Emergency Red S.O.S.
4. Floodlight ON/OFF Button four times = OFF
NOTE
Do not look directly into the LED floodlight.
SPECIFICATIONS
| Battery Capacity | 94.9Wh, 26000mAh (18.25V) |
| DC 5525 Input | 12-24V, 50W |
| USB-C PD Input/Output | 45W |
| USB-A Outputs | 5V 2.4A |
| Wireless Output | 10W max |
| Dimensions | 224 x 130 x 41 mm |
| Weight | 1.1 kg |
| Operating Temperature | 32°F - 113°F (0 - 45°C) |
| Discharge Temperature | 14°F - 104°F (-10 - 40°C) |
SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS
CAUTION - Read all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire which may result in serious injuries, death or property damage.
• Read all instructions before using the product.
• When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your jump starter may cause electric shock to users and damage equipment
• Keep dry and away from moisture and corrosive materials. This product should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
• Do not expose to moisture, water, rain, or snow.
• Keep away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.
• The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 176°F (80°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ,ejected from the battery may cause irritation or burns.
• The product may become warm under extended high power operation. Do not cover, wrap, or otherwise, restrict during operation.
• Do not disassemble the the product. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
• Do not drop or subject to strong impacts. Do not operate if the unit has received a sharp blow, or has otherwise been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• This product and its accessories are not toys and should be kept away from children.
• Do not insert any foreign object into the ports or openings.
• Do not clean with harsh chemicals, soaps or detergents. Just wipe the unit with a soft cloth.
• Make sure the charging ports do not become contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local guidelines.
