Ultimate (UK Socket)

NEBO Ultimate UK Socket Instruction Manual

NEBO ULTIMATE Multi Voltage Power Pack – the ultimate solution for power on the move. Packed with innovation and versatility, this powerhouse device ensures you're ready for anything life throws your way.

 
 

OVERVIEW

 

 
1  |  Jump Start Output 11 | AC 3-Pin Plug (UK) Port
2  |  Jump Start Output 12 | Floodlight ON/OFF Button
3  |  Air Pressure Up Button 13 | LED Floodlight
4  |  Air Pressure Down Button 14 | AC Power ON/OFF Button
5  |  Digital Display 15 | Interchangeable Nozzle Kit
6  |  Unit Button (PSI, BAR, KPA) 16 | 12V Car Charge Adapter
7  |  Compressor ON/OFF Button 17 | Jumper Cable Clamps
8  |  USB ON/OFF Button 18 | UK Charging Adapter
9  |  USB-A Output & USB-C Bi-Directional Port 19 | 24in Air Extension Hose
10 | Integrated Air Hose 20 | USB-C to USB-C Cable

 


 

JUMP STARTING YOUR VEHICLE

1. Plug the jumper cables into the jump-start output.

2. Attach the jumper-cable clamps to the vehicle battery. - Red clamp on positive terminal(+) - Black clamp on negative terminal(-)

3. Press the "Jump Start" button and wait for a solid green light.

4. Start your vehicle.

NOTE
Do not touch red (positive) and black (negative) clamps together. Allow 15 seconds between each jump-start attempt. If your vehicle does not start after three attempts, consult a certified mechanic.


 

CHARGING YOUR NEBO ULTIMATE

CHARGING AT HOME: 

1. Connect the USB-C Cable end to the USB Adapter that came with your device (not included), and plug the USB-C end into the USB-C Bi-Directional Port, located on the back of your Ultimate.

2. Plug the USB Adapter into a standard wall outlet.

3. The USB-C Bi-Directional Port, port will begin to charge automatically when a device is detected.

4. When fully charged, the LCD screen will indicate 100% (This could take up to 4 hours).

5. Disconnect cable and power off your Ultimate.

 

CHARGING IN YOUR VEHICLE: 

1. Connect the USB-C Cable end to the 12V Car Charger (included), and plug the USB-C end into the USB-C Bi-Directional Port, located on the back of your Ultimate.

2. Plug the 12V Car Charger into the vehicles DC output (cigarette lighter).

3. The USB-C Bi-Directional Port, port will begin to charge automatically when a device is detected.

4. When fully charged, the LCD screen will indicate 100% (This could take up to 4 hours).

5. Disconnect cable and power off your Ultimate.

 

 

CHARGING YOUR ELECTRONIC DEVICES

1. Connect the appropriate cable to your device.

2. Plug the cable into the appropriate USB Output Port.

3. Press the USB ON/OFF button to begin charging your device.

4. Disconnect cable and power off your NEBO Ultimate.

NOTE
The NEBO Ultimate USB charging feature will automatically power off after 30 minutes of inactivity.


 

USING THE AIR COMPRESSOR

1. Connect the air hose to the tyre or inflatable - using the appropriate nozzle.

2. Press the ( +) or (-) button to set the desired pressure. The measuring units can be changed by pressing the UNIT button.

3. Press the Air Compressor ON/OFF button. The air compressor will shut off automatically once the pressure has been reached.

NOTE
The air compressor can be started or stopped by pressing the air compressor ON/OFF button. Always follow the manufacturer's recommended pressure.


 

USING THE AC PORT

1. Connect the AC power plug from your device into the AC port, as shown below.

2. Press the AC ON/OFF Power Button to begin charging.

3. When charged, disconnect cable and power off your NEBO Ultimate.

NOTE
Any electronic device can be powered by the AC output port as long as it is rated at 75 watts or less.

BE SURE TO CHECK THAT YOUR LAPTOP OR OTHER ELECTRDNIC DEVICE IS RATED AT 75 WATTS OR LESS.

NOTE
Make sure the AC power plug is fully plugged into the AC port before pressing the AC Power ON/OFF Button.

NOTE
A flashing green light indicates safety checks are in progress. lf you see a flashing red light, the device you connected is rated for greater than 75 watts and cannot be powered using the NEBO ULTIMATE charger.

*The multi-voltage power pack will charge a wide variety of laptops either via the USB-C or Laptop Adapter


 

USING THE FLOODLIGHT

1. Floodlight ON/OFF Button once = ON White Floodlight

2. Floodlight ON/OFF Button twice = ON Red Floodlight

3. Floodlight ON/OFF Button three times = ON Emergency Red S.O.S.

4. Floodlight ON/OFF Button four times = OFF

NOTE
Do not look directly into the LED floodlight.


 

SPECIFICATIONS

Battery Cells 15,000mAh
Battery Capacity 55,500mWh
USB-C lnput/Output PD/QC3.0 20W
USB-A Output 5V 2.4A
AC Output 230VAC 50HZ 75W
Jump Start Output 12VDC/600A for 3s, 1500A Peak
Air Compressor 130 psi max
Dimensions (L) 275mm x (W) 143mm x (H) 57mm
Weight 1150g
Operating Temperature 32° F -113°F (O - 45°C)
Discharge Temperature 14°F - 104°F (-10 - 40°C)

 


 

SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS

CAUTION - Read all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire which may result in serious injuries, death or property damage.

• When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your jump starter may cause electric shock to users and damage equipment
• Keep dry and away from moisture and corrosive materials. This product should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
• Do not expose to moisture, water, rain, or snow.
• Keep away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.
• The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 176°F (80°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ,ejected from the battery may cause irritation or burns.
• The product may become warm under extended high power operation. Do not cover, wrap, or otherwise, restrict during operation.
• Do not disassemble the the product. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
• Do not drop or subject to strong impacts. Do not operate if the unit has received a sharp blow, or has otherwise been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• This product and its accessories are not toys and should be kept away from children.
• Do not insert any foreign object into the ports or openings.
• Do not clean with harsh chemicals, soaps or detergents. Just wipe the unit with a soft cloth.
• Make sure the charging ports do not become contaminated with lint or other debris. Use a canned-air type of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local guidelines.