Tripod With Dual-Head Crossbar
The ultimate lighting solution tailored for trade professionals, DIY enthusiasts, and beyond. Engineered for durability and crafted to withstand the demands of any job site, this tripod system is your steadfast companion for reliable illumination.
OVERVIEW
| 1 | NEBO Tripod |
3 | Carry Bag
|
| 2 | Dual-Head Crossbar |
4 | Tripod Mounting Kit |
SETTING UP THE TRIPOD
1. Loosen the Leg Lock and fully extend the three tripod legs by pulling them out from the centre, then tighten the Leg Lock.
2. Holding the tripod firmly in place, open the Quick Release Clamp, slide the tripod head to desired height level. Close the Clamp to lock the position.
CONNECTING YOUR LIGHT
1. Using the NEBO Tripod Mounting Kit supplied with your NEBO Light. Insert the Quick Release Bolt into the Tripod Head slot (You will hear a click)
2. To remove the light, pull the Upper Quick Release Clamp and lift the light upwards.
(Please refer to tripod mounting kit instructions supplied with the NEBO light)
USING THE DUAL-HEAD CROSS BAR
1. Slot the Quick Release Bolt on the Cross Bar into the Tripod Head slot (You will hear a click).
2. Connect up to 2 NEBO lights using the Quick Release Bolts (Refer to ‘Connecting Your Light’ instructions)
3. To remove the Cross Bar, pull the Upper Quick Release Clamp and lift the Cross Bar upwards.
SPECIFICATIONS
| Carry Bag IP Rating |
IPX4 |
| Dimensions (L/W/H) (Open) |
1000 x 1000 x 1900mm |
| Dimensions (L/W/H) (Closed) |
180 x 180 x 1060mm |
| Weight |
3100g |
